Jun 5, 2013

Posted by in Uncategorized | Comments Off on What HVAC Services Do

What HVAC Services Do

Regular Furnace Repair Portland can help your home’s cooling system last longer and operate more efficiently. You can easily do some jobs (such as changing the air filter), but bigger jobs should be handed off to a licensed HVAC services company. Homeowners should have their systems checked at least once per year, preferably in the spring. Below is a brief guide on home AC maintenance.

Regular Tune-ups and Filter Changes

Your AC system is your home’s best defense against sweltering summer weather. To get the best performance from any type of system, give it the seasonal maintenance it needs with:

Regular filter changes. The filter is the most commonly overlooked AC maintenance item. To maintain top efficiency, you should change your filters at least four times per year, if not more. Clean filters trap more contaminants and help your system last longer. During times of high use, you may need to change your filters more often.

Tune-ups: Other than regular filter changes, a professional tune-up is the best way to maintain your home’s air conditioning system. Schedule your service calls around the time of year that daylight savings time begins and ends.

What Your HVAC Technician Does for You

During the typical service call, your cooling system technician will perform certain steps to make sure your AC is working properly. These steps include:

Checking the thermostat. A programmable thermostat is a simple way to ensure that your AC cools at the most efficient time. During a service call, the technician will check the thermostat’s settings to see if it is working as programmed.

Testing of voltage and inspection of electrical components. Broken connections can cause problems with your system, and increase the chances of premature failure.

Oiling moving parts. If your system’s moving parts aren’t properly lubricated, friction can decrease its efficiency, and parts can wear out faster.

Inspection of condensate drains: If your AC’s drain is plugged, high humidity, bacteria growth and water damage can result.

Checking controls: Your system’s shutdown and startup cycles are typically based on its thermostat settings, and your technician will check them for safe operation.

Coil cleaning: The HVAC technician will clean the system’s coils during a service call. Dirty coils can cause the system to run longer, and utility bills to be higher.

Refrigerant recharging: If your refrigerant level is too low, the system will not work properly and the compressor can be damaged.

    

Share

    Pin It on Pinterest

    Shares
    Share This