Apr 23, 2013

Posted by in Uncategorized | Comments Off on How to Troubleshoot Air Conditioning Problems

How to Troubleshoot Air Conditioning Problems

It is really hot out and you are looking for some relief. However, your air conditioner is broken. What are you going to do to fix it? You could call a repairman, but you don’t have much money right now. Let us look at what it would take to do Air Conditioner Repair Davenport FL yourself.

We are only going to look at central Air Conditioning. These have two different main components. Your evaporator coil will be somewhere inside your home, usually in a small closet. The other part, the condenser, will be on concrete outside your home.

Now that you have found both main parts, turn off the power to both units. If you cannot find the power switches, call a repairman. Do not attempt any work without the power being off. Another thing you must understand is when it comes to Air Conditioner Repair Davenport FL there are only a few things you can do yourself.

One problem that you can check for is if there has been no power to the condenser. Here you need to first check your circuit breaker. You are checking for tripped breakers or a blown fuse. If there is not, call a professional.

You can also adjust the thermostat. If it is not staying cool enough, try adjusting the thermostat setting down by five degrees. If this does not work, check for items blocking the condenser unit. If your condenser turns on and off, check for items blocking it again. If neither of those steps works, then clean your condenser unit.

If you think that the evaporator is dirty, then you will need to clean it. Make sure to have a piece of wire, hand mirror, bleach, screwdriver, and a stiff brush. Now, take off the insulation carefully and use the screwdriver to remove the access panel. Now use the stiff brush to clean the underside of the unit. Here you can use the mirror if you cannot see all of it. Clean the evaporator tray. If the weep hole is clogged use the wire to clear it. Then, pour a small amount of bleach into the weep hole to prevent fungus from growing. Put everything back in place.

Turn the power back on and test it. If it works congratulations. If it does not run, then call a repairman because there may be a broken or damaged part.

Share

    Pin It on Pinterest

    Shares
    Share This