At the waste transfer station in Mcdonough, GA, garbage trucks are unloaded, rubbish is screened and disposed of, loads are compacted, and loads are reloaded into larger vehicles.
A scale and an enclosed building where transfers take place are usually included in the facility. The property needs enough space so that vehicles can queue at the scale and the main building.
There are outbound transfer trailers and unsuitable garbage to stage at waste transfer stations, so these facilities require additional space. A transfer station usually has scales, front-end loaders, cranes, conveyors, walking floors, and compactors in addition to scales. On a daily basis, a Waste Transfer Station In Mcdonough, GA typically performs the tasks discussed below.
Arrivals and Scale
Inbound commercial vehicles are first checked at the scale house when they arrive. Loads are weighed and weighted fees are assessed if needed.
Public Drop Off
It is possible to set up a dedicated line and scale for public garbage drop-off if a transfer facility lets the public drop off solid waste. Several waste transfer facilities allow the public to deposit green waste or other recyclables.
In a primary transfer building, vehicles are unloaded. Immediately, solid garbage may be deposited on the floor, put into a pit, or transferred to another vehicle.
The workers at the transfer point will inspect the trash for prohibited materials. Compactors are used by some transfer facilities to compress rubbish and increase the payload of outbound trailers.
Operators of scale houses, traffic controllers, equipment operators, maintenance mechanics, and other technical and managerial staff are all needed at waste transfer stations.