Helpful Tips For Successful Installation Of Rexnord Bearings

One of the challenges for many businesses in Louisiana relying on mechanical and electrical power transmission applications is to limit the downtime of the motors or system components during repairs and replacements of parts.

Often relatively simple parts, such as bearings, can be difficult to replace, particularly if the maintenance department is not familiar with the process or has not had to replace bearings in the past on the specific equipment or systems. Taking a few minutes to review the process and to know how to prevent problems during the bearing removal and replacement helps to reduce the overall time and decrease frustration.

Choosing the Best Bearings for the Job

Replacing bearings can be a very difficult job depending on the location of the bearing on the equipment, the other mechanical issues as well as the specifics for the application. Choosing to buy a top name in bearings, such as Rexnord bearings, means a guarantee of quality in the bearing that not only makes installation easier, but it also means a longer duty cycle than a cheap bearing.

Verify the Size and Type

There are multiple types of Rexnord bearings on the market, and knowing the exact bearing size and type to order as a replacement is critical. Not all bearings, even if they the right size, are the right type of bearing for the equipment. Always verify the new bearing is the right option based on the manufacturer’s recommendation or OEM part. In many cases, past work may have replaced the OEM bearing with an incorrect part, and correcting this error is essential to extend the life.

Review Installation Instructions and Check the Shaft

All Rexnord bearings come with instructions for the correct installation of parts. Take the time to review the supplied information before getting started. Additionally, always take a close look at the shaft. If it is damaged, it should be repaired or replaced before installing the new bearing.

Spread the love

Recommended Articles