Dec 23, 2013

Posted by SHANELL CALLOWAY in Uncategorized | Comments Off on Steps in Cleaning a System for Air conditioning in Lake Oswego

Steps in Cleaning a System for Air conditioning in Lake Oswego

Keeping a system for Air conditioning in Lake Oswego working well is something that most homeowners will want to think about prior to the start of the summer season. Air conditioning systems are designed to last for a number of years if they are properly maintained. If regular maintenance is not handled on the system then it is more likely to breakdown and need repairs when it is needed most. Because of this, the ideal time to think about maintenance on the unit can be in the months prior to the start of the warm summer season.

One of the main ways to keep a system for Air conditioning in Lake Oswego working at its best is by keeping it clean. Units that are not cleaned on a regular basis must work much harder. This puts excess stress on the various components in the unit and this can cause them to break down much more often than they should. In addition, a unit that is dirty will need to use more energy to operate. This increase in the amount of energy being used can cause a home’s utility bills to increase as well. Visit Oregon Heating & Air Conditioning for more information.

Cleaning a system for Air conditioning in Lake Oswego is not a difficult task. Many homeowners may wish to handle this on their own. However, hiring a professional repair person can be best in many situations. Most systems have two separate units, one outside and the other inside the home. The indoor unit can be cleaned using a vacuum cleaner with a long nozzle attachment. The vents on the unit should be cleaned with a stiff brush and the fan should be cleaned with this brush as well. The inside unit generally has an air filter, which should be inspected and replaced if it is too dirty to allow the flow of air through it.

The unit that is outside will often contain a lot of large debris from trees, grass clippings or even trash. This should be removed first. This unit has coils that look similar to those found on a radiator. They will need to be cleaned using a vacuum or a hose with a high-pressure nozzle. Sometimes if the coils are especially dirty, they may require the use of a coil cleaner as well. The fins on the unit will also need to be cleaned with a soft brush. Visit website for more

265419_m10556339_l

Share

    Pin It on Pinterest

    Shares
    Share This