May 7, 2015

Posted by in Dental Clinic | Comments Off on General Knowledge about Implants in St George UT

General Knowledge about Implants in St George UT

Implants in St George UT are cylinders made of pure titanium that have been subjected to a special surface treatment to ensure bone osseointegration. It is a bio-compatible medical prosthesis, suitable to be implanted in the human body and, therefore, must be subject to the most severe health checks. It is a piece of high precision, designed to withstand very large forces of implant, such as those made by the jaws in the process of chewing. They must also meet certain conditions concerning perfect mechanization and placement. For all these reasons, it is important to work with implants of recognized quality.

A restored tooth with an implant is composed of three parts: the cylinder, root, and ring or sleeve. There are many types of implants on the market. Titanium implants have a smooth or rough surface, depending on the type of treatment you will receive. At first, all implants are smooth but currently there are studies showing greater speed and quality of implant osseointegration with a rough type. As for the anti-rotation mechanism, it is basically divided into hex implants. In the beginning, it was more common to use external hexagon systems. However, current implantology thinks that the combo of an internal hexagon and cone can give dentists the ability to lock friction. This allows a more stable prosthesis over time, allowing for more esthetic possibilities in prosthetic rehabilitation.

In terms of design, you have self-tapping Implants in St George UT and then those that are not. The self-tapping design provides greater stability and ease of placement and significantly reduces the possibility of overheating of the bone during surgery. These implants have a lower failure rate according to studies. The first implants designed were not self-tapping. However, the evolution of technology has opened the door for the self-tapping design.

As with any medical procedure, there are successes and failures. The success rate of implant placement in the local academia is 99%, and in private practice it is no lower than 95 percent. If there is a lack of care, the failure rate can range between 30 and 70%. Rather it means that the dentist set guidelines, like not smoking or drinking, and the patient did not follow them. If implantation is to be a success, the dentist must consider the patient as a whole and pre-treat any existing condition. Click Here to learn more.

Share

    Pin It on Pinterest

    Shares
    Share This