Jul 16, 2015

Posted by in Autos | Comments Off on Expert Brake Services in Indianapolis IN Keep a Vehicle Stopping Properly

Expert Brake Services in Indianapolis IN Keep a Vehicle Stopping Properly

Expert Brake Services in Indianapolis IN Keep a Vehicle Stopping Properly

An automobile is a mix of very important components designed to make the vehicle move or stop. When something goes wrong, then it’s time to consult an expert such as Pete’s Service Center in Indianapolis, IN to determine the fault and make repairs. For example, when the brakes begin to fail or show signs of wear, then the car or truck may be due for Brake Services in Indianapolis IN. Brakes service can be as simple as flushing the brake lines and removing gunk or air from the system to replacing the pads when they have become worn.

The modern automotive braking system uses a set of pads that fit against the wheel rotor. To engage these pads, pressure is applied to the brake pedal which activates a piston in the master cylinder. This forces pressurized fluid through the brake lines to the brake calipers on each wheel. The calipers push the exterior pad against the rotor and the whole assembly pulls the interior pad towards the rotor. The actual stopping force is the friction involved when applying pressure to the pads.

One potential fault with disc brakes is the rotor itself. Wheel rotors are made from cast metal and machined to provide a smooth braking surface. As the brakes are used, this surface becomes worn. Wear patterns such as grooves can detract from the vehicle’s ability to stop properly. The solution for this problem involves special Brake Services in Indianapolis IN. More specifically, the rotor will need to be turned. That is, the surface of the rotor will need to be smoothed so that the new brake pads have a better surface for smooth braking.

Turning the rotor implies that there is enough metal on the rotor to allow some of it to be removed and still remain strong. A weak rotor can cause all sorts of problems. For instance, a thin rotor can crack from stress or too much heat. Heat cracks can lead to failure and might even cause the driver to lose control of the vehicle. Poorly turned rotors can also affect the service life of the brake pads causing them to wear unevenly or wear out too quickly. Rotor problems may also be noticeable when applying the brakes. The driver may feel the vehicle pull to one side. Such a situation can cause the driver to lose control of the vehicle under adverse conditions. Visit Petesservicecenter.com for more information.

Share

    Pin It on Pinterest

    Shares
    Share This